Fiber Reactive Dye - Dyeing Wool & Silk

Customer Service & Information Page

Silk can be solid color dyed with cold water using the same tub dyeing method as for cotton. The colors on silk are not as predictable nor the same as on cotton. Mixed colors tend to shift one way or another. But it is so easy compared to hot dyeing that it is well worth trying. Soda ash will take away some of the sheen of silk and can give silk more of a stonewashed appearance unless exposure is limited. To avoid that, try the vinegar method below.

Wool cannot be dyed with the cotton method. The method below yields beautiful colors on both wool and silk, although silk usually takes the dye better than wool. Fiber Reactive dyes will exhaust better on silk as well. Fiber reactive dyes give the best results when used on high-quality, white, pure virgin wool or 100% white silk. Reused fabrics or yarns may contain impurities which will interfere with the dye process. Oils or gum on the fabric or yarn will prevent the dye from taking uniformly, so we recommend ALWAYS pre-washing your silk or wool before dyeing with Dharma Dyer's Detergent and HOT water. Fabric or yarns of an existing color will be blended with the dye color used. On silk, the colors shift. Best to do a test first. Fiber Reactive blacks do not yield black on silk. Use a black Acid or Lanaset silk dye for the best darkest black on silk or wool.

The following recipe is per 1 pound (450 gm.) of dry weight of wool or silk.

  1. Place 1 to 5 teaspoons (3-15 gm.) of dye (depending on the shade desired) into a one-quart Pyrex measuring cup, add a small amount of cold water (for Procion type) or hot water (for the new Dharma Hot Water Fiber Reactive Dyes) and work into a smooth paste with a stainless steel or plastic spoon. Add 1 cup of water at 60 degrees C (140 degrees F) to this dye paste. Stir well to dissolve all the dye and pour into the dyebath container (should be stainless steel, glass, or enamel, not aluminum or copper).
  2. Dissolve 3 to 9 tablespoons (180-270 gm.) of plain salt (depending on the intensity desired) in 2 cups of warm water and add to the dyebath. Add the fabric. Add enough water to cover the material plus a little extra to allow the yarn or fabric to move freely in the dyebath.
  3. Place the dyebath container on the stove and heat gradually to a simmer (just below boiling) and hold there for 10 minutes, stirring frequently. Add 2/3 cup white vinegar or equivalent concentration of Citric Acid and continue to simmer for another 10 minutes, stirring occasionally.
  4. Remove from heat, rinse in hot tapwater and wash with Dharma Dyer's Detergent. Rinse until free of dye, gradually lowering the temperature of the rinse water to that of the room. Remember that sudden changes in temperature can damage the wool and cause it to felt up. Heat and cool slowly!

Enjoy!


Customer Comments
Image of a notebook and pencil
 

If you'd rather speak with a human, please call toll-free from anywhere in the U.S. or Canada M-F 8am to 5pm PST

Phone: (800) 542-5227

Your item has been added to your shopping cart   Item Added to Cart
Your item has not been added to your shopping cart   Item Not Added

About Tiered Discount Levels

You can combine cotton and rayon clothing & accessories to get the greatest discounts. Your discount is figured on the total number of cotton and rayon items we ship, not how many of each type, style or size. Mix and match them to get the best discount.

Example: adding 4 each of 3 different T-shirts in any sizes will give you the 12+ price on all 12 shirts.

Visual aid for discount details

Visual aid for how discounts will look in cart

Some products may be excluded from discounts, and / or may discount only with themselves. If you have any questions at all please contact us toll free at 800-542-5227 (no buttons, just humans).

Drag and Drop chips to the Palette first.

ssl test img